Results You searched for: PHCbi Large Capacity CO2 Incubator Results Displayed: 1 - 1 of 1
CytoGrow ReachIn Large Capacity CO2 Incubator
PHCbi Healthcare’s CO2 incubator is designed to save lab space while offering the flexibility to grow your culturing needs. The control system provides a precise and repeatable chamber environment.
The MCO-80ICL-PA is ideal for culturing large volumes of biological samples, performing microbiological studies and working with large volume cell apparatus.
Humidity Control
Humidity reservoir heaters are located outside the walls of the reservoir. They are not as susceptible to corrosion and scaling from water as competitive systems are. The unit can be set to normal (80% RH or above) or high (90% RH or above ) humidity mode.
Rapid CO2 Density Recovery
IR sensor achieves ultrafast CO2 recovery without overshoot, even following multiple door openings.
The cross shelf, horizontal laminar airflow system promotes optimum temperature uniformity throughout the chamber which contributes to quick temperature recovery after door openings. Side plenum walls are perforated for positive, even airflow. The horizontal airflow allows for full use of solid shelves providing maximum culturing capacity.
Contamination Control
Incubator interior, shelves and plenum system incorporate inCu-saFe copper enriched, stainless steel alloy which offers germicidal properties of elemental copper. InCu-saFe prevents corrosion and discoloration of the incubator interior.
Control and Monitoring
The incubator functions are managed by a fully integrated microprocessor controller with a range of setpoints and alarms for temperature and CO2. Two levels of elevated humidity can be selected. All functions are programmable through the control panel. Independent LED displays for CO2 and temperature are standard.
2; LED (1 for temperature and 1 for CO2) readable to 0.1 increments
Sensor
CO2
IR
CONSTRUCTION
Exterior Material
Painted steel
Interior Material
Stainless steel copper enriched alloy
Outer Door
qty
1; Dual pane heated glass with latch (provision for padlock)
Shelves
qty
5; Stainless steel copper enriched alloy
Shelf Dimension (W × D × H)
inches | mm
30.6 × 25.9 × 0.4 | 776 × 659 × 10
Max. Load per Shelf Distributed Evenly
lbs | kg
66 | 30
Max. Total Load
lbs | kg
330 | 150
Max. Shelf Capacity
qty
18
Access Port / Position
qty
2; Right side and left side
Access Port Diameter
inches | mm
1.6 | 40 with silicone (non-VOC) stopper
Casters
qty
4; Dual wheel (front 2 swivel, back 2 fixed)
Leveling Feet
qty
4
Humidity Reservoir Drain
qty
Drain valve – lower side front (drainage tray provided)
Humidity Reservoir Material
Stainless steel
DECONTAMINATION CONTROL
InCu-saFe Chamber Air Plenum and Shelves
passive
Included (stainless steel copper enriched alloy)
ALARMS
(V=Visual Alarm, B=Buzzer Alarm, R=Remote Alarm)
Power Failure
R
Temperature Deviation
high
V-B-R
Gas Deviation
CO2
V-B-R
Supply Empty
CO2
V-B-R
Door Open
V-B
Low Water in Humidity Reservoir
V
ELECTRICAL AND NOISE LEVEL
Power Supply
115V, 1Ø, 60Hz, NEMA 5-20P requires NEMA 5-20R receptacle
Noise Level 3)
dB(A)
33
1) Exterior dimensions of main cabinet only, excluding handle and other external projections
2) Ambient temperature (in a +20°C to +35°C), setting 37°C, CO2 5%, no load, air temperature measured at incubator center
3) Nominal value – Background noise 20dB[A]
CytoGrow ReachIn Large Capacity CO2 Incubator
PHCbi Healthcare’s CO2 incubator is designed to save lab space while offering the flexibility to grow your culturing needs. The control system provides a precise and repeatable chamber environment.
The MCO-80ICL-PA is ideal for culturing large volumes of biological samples, performing microbiological studies and working with large volume cell apparatus.
Humidity Control
Humidity reservoir heaters are located outside the walls of the reservoir. They are not as susceptible to corrosion and scaling from water as competitive systems are. The unit can be set to normal (80% RH or above) or high (90% RH or above ) humidity mode.
Rapid CO2 Density Recovery
IR sensor achieves ultrafast CO2 recovery without overshoot, even following multiple door openings.
Horizontal Laminar Airflow
The cross shelf, horizontal laminar airflow system promotes optimum temperature uniformity throughout the chamber which contributes to quick temperature recovery after door openings. Side plenum walls are perforated for positive, even airflow. The horizontal airflow allows for full use of solid shelves providing maximum culturing capacity.
Contamination Control
Incubator interior, shelves and plenum system incorporate inCu-saFe copper enriched, stainless steel alloy which offers germicidal properties of elemental copper. InCu-saFe prevents corrosion and discoloration of the incubator interior.
Control and Monitoring
The incubator functions are managed by a fully integrated microprocessor controller with a range of setpoints and alarms for temperature and CO2. Two levels of elevated humidity can be selected. All functions are programmable through the control panel. Independent LED displays for CO2 and temperature are standard.
The cross shelf, horizontal laminar airflow system promotes optimum temperature uniformity throughout the chamber which contributes to quick temperature recovery after door openings. Side plenum walls are perforated for positive, even airflow. The horizontal airflow allows for full use of solid shelves providing maximum culturing capacity.
Contamination Control
Incubator interior, shelves and plenum system incorporate inCu-saFe copper enriched, stainless steel alloy which offers germicidal properties of elemental copper. InCu-saFe prevents corrosion and discoloration of the incubator interior.
Control and Monitoring
The incubator functions are managed by a fully integrated microprocessor controller with a range of setpoints and alarms for temperature and CO2. Two levels of elevated humidity can be selected. All functions are programmable through the control panel. Independent LED displays for CO2 and temperature are standard.
