Results You searched for: ULT Freezers VIP - Chest Results Displayed: 1 - 1 of 1
PHCbi Ultra-Low Chest Freezer
The MDFC8V1’s ideal -86°C freezing environment using VIP® PLUS insulation technology maximizes storage capacity. The uniquely designed single-compressor system achieves higher energy efficiency and space saving construction.
Microprocessor Controls Comprehensive set-point, alarm, monitoring, and diagnostic functions based on Panasonic-built microprocessor controller with digital display of all input/output functions.
Panasonic-Designed Refrigeration and Compressors Designed by PHCbi specifically for rugged ultra-low temperature applications in a laboratory environment. CFC-free refrigerants only. High-performance refrigeration system with foam-in-place cabinet insulation maximizes interior temperature uniformity and protects against fluctuating ambient temperatures.
High Density Blown-In Foam Insulation and Heated Gasket Seal In ultra-low temperature freezers, effective insulation is critical. The insulation used in PHCbi ultra-low freezers is two layers of rigid, foamed-in-place polyurethane, placed together to form a double-insulation wall. This design prevents the insulation layers from distortion and cracking that might occur due to temperature differences inside and out. Frost and icing on the top edges and gaskets are prevented by utilization of a heated mullion, which recycles heat from the refrigeration system without affecting chamber uniformity.
Built-In Temperature & Power Failure Alarms (Lamp/Buzzer) In case of power failure or an irregular rise in temperature, a high capacity, rechargeable battery-operated indicator lamp and alarm will be activated. Optional CO2 and LN2 back-up systems are available and are self-activated when a power outage occurs. This equipment helps ensure that the contents will be protected in the event of any power failure or mechanical trouble.
Rigid polyurethane foamed-in place and vacuum insulation panel (VIP® PLUS)
ACCESS PORT
Diameter: 17 mm (0.6 in), back side, bottom
NET WEIGHT
67 kg (148 lbs)
COMPRESSOR
Hermetic rotary type, Output: 400 W
EVAPORATOR
Tube on sheet type (also used as an inner cabinet)
REFRIGERANT
HFC mixed refrigerant
TEMPERATURE CONTROL RANGE
-60°C to -86°C (ambient temperature; 30°C, no load)
ALARMS
High/low temp, Power failure, Filter check, Battery check. Optional LabAlert
TEMPERATURE CONTROL SYSTEM
Microprocessor Control System
AREA FOOTPRINT
3.95 sq.ft. (0.37 m2)
DATA MANAGEMENT
Optional with LabAlert System
ENERGY CONSUMPTION AT 23°C AMBIENT
7.20 kWh/day
SOUND LEVEL
47 dB [A] (background noise; 20 dB)
PHCbi Ultra-Low Chest Freezer
The MDFC8V1’s ideal -86°C freezing environment using VIP® PLUS insulation technology maximizes storage capacity. The uniquely designed single-compressor system achieves higher energy efficiency and space saving construction.
Microprocessor Controls Comprehensive set-point, alarm, monitoring, and diagnostic functions based on Panasonic-built microprocessor controller with digital display of all input/output functions.
Panasonic-Designed Refrigeration and Compressors Designed by PHCbi specifically for rugged ultra-low temperature applications in a laboratory environment. CFC-free refrigerants only. High-performance refrigeration system with foam-in-place cabinet insulation maximizes interior temperature uniformity and protects against fluctuating ambient temperatures.
High Density Blown-In Foam Insulation and Heated Gasket Seal In ultra-low temperature freezers, effective insulation is critical. The insulation used in PHCbi ultra-low freezers is two layers of rigid, foamed-in-place polyurethane, placed together to form a double-insulation wall. This design prevents the insulation layers from distortion and cracking that might occur due to temperature differences inside and out. Frost and icing on the top edges and gaskets are prevented by utilization of a heated mullion, which recycles heat from the refrigeration system without affecting chamber uniformity.
Built-In Temperature & Power Failure Alarms (Lamp/Buzzer) In case of power failure or an irregular rise in temperature, a high capacity, rechargeable battery-operated indicator lamp and alarm will be activated. Optional CO2 and LN2 back-up systems are available and are self-activated when a power outage occurs. This equipment helps ensure that the contents will be protected in the event of any power failure or mechanical trouble.
